

LIB Provides Free Talcum Powder for Dust Chamber

Table of Content [Hide]

Did you know that in the dust simulation experiment conducted in the dust test chamber, talcum is used to simulate sand dust? So why not do the dust test with real sand?

In fact, the reason is very simple, the weight of a single piece of sand is large, and the shape is irregular, in the sand test under the IEC 60529 standard, the slow wind speed can not blow the sand, and it is not easy to filter through the filter.

Talc powder has many advantages such as uniform particle size, stable chemical properties and good fluidity, which makes it an ideal choice for simulating real environmental dust. Talc with different mesh numbers can correspond to the size distribution of dust particles in different scenarios, from small to simulate fine dust wear inside precision instruments to large to reproduce dust accumulation in the extensive environment of the factory floor. 50μm diameter talc meets IP5X IP6X dust test requirements.

Talc is suitable for the LIB dust test chamber, which adopts advanced sealing technology and electromagnetic lock to prevent misoperation, ensure that the internal test environment is completely isolated from the outside world, and eliminate any accidental air exchange or impurity mixing, so as to ensure the purity of the experimental data and the dust concentration. In terms of temperature control, it is equipped with a sophisticated temperature control system that can make the temperature in the ambient temperature of +50℃, which can ensure the drying of talc. The O-type vertical dust circulation system allows talc to be reused.

Model	DI-800	DI-1000	DI-1500	DI-2000
Internal Dimension (mm)	80010001000	100010001000	100015001000	100020001000
Overall Dimension (mm)	104014501960	133014501960	133019501990	133024501990
Useful Volume (L)	800	1000	1500	2000
Temperature Range	Ambient ~ +50℃
Humidity Range	< 30% RH
Normal Wire Diameter	50um
Nominal Width of a Gap Between wires	75um
Fight Time	0 ~ 99H59M
Blowing Time	0 ~ 99H59M
Interior Material	SUS304 stainless steel
Standard Configuration	Sample shelf, dust wiper, talcum powder(5kgs)

Not only that, the size of the dust test chamber workroom can be customized, which can not only accommodate large industrial equipment for field simulation, but also provide an independent and stable micro-environment for small fine material experiments through modular zoning design. The workroom also has a preset observation window for real-time and clear observation of dynamic processes such as dust diffusion and sedimentation.

If you are interested in taking advantage of this offer, you can fill in the details below, including the purpose of your study, the estimated duration of the experiment, the specific talc size required and the estimated amount of talcum. Once we have received your application, the LIB team will contact you within 1 business day to confirm follow-up arrangements.

References